Preloader
23-06-22
09:30
Eğitimciler

FMEA (Failure Modes and Effects Analysis)

The FMEA (Failure Modes Effect Analysis) discipline was developed in the US Army in the manufacture of aircraft in the 1960s....

Detaylı İncele
23-06-22
13:30
Eğitimciler

Workstation Design, Ergonomics, 5S

Lean workstation design; It is the design of a process that will provide efficient outputs in accordance with ergonomic rules in...

Detaylı İncele
28-06-22
09:30
Eğitimciler

Yamazumi (Line Balancing)

Yamazumi; is the balancing of work steps in accordance with takt time and other constraints using time measurement values. In-factory milk...

Detaylı İncele
28-06-22
13:30
Eğitimciler

Kanban, Heijunka, Milk - Run

Heijunka means leveled production or balanced production. In short, it is a production management that is free from demand imbalance. Kanban...

Detaylı İncele
29-06-22
09:30
Eğitimciler

ERP Supported Production Planning (ERP – MRP II, CRP)

MRP (Material Requirements Planning) is the technique that plans the required material needs for production using stock information, order information and...

Detaylı İncele
05-07-22
09:30
Eğitimciler

Lean Leadership

Leadership in the sense of organization is a social impact process that ensures the willing participation of its employees in order...

Detaylı İncele
06-07-22
09:30
Eğitimciler

Strategic Performance Management

Strategic Performance Management; It is a development and improvement process according to the performance criteria determined by each institution in accordance...

Detaylı İncele
06-07-22
13:30
Eğitimciler

Competency Management

Competency management is the determination of the competencies required by the organization and the work and the evaluation and development of...

Detaylı İncele
07-07-22
09:30
Eğitimciler

Influencing Techniques and Performance Interviewing

Performance interviewing is to communicate with the person on a behavior that has a positive or negative effect, in a way...

Detaylı İncele
07-07-22
13:30
Eğitimciler

Process Audit

Process auditing is an independent, objective assurance activity that provides guidance and evaluates whether the resources are managed according to the...

Detaylı İncele
19-07-22
09:29
Eğitimciler

Applied Lean and Digital Transformation Workshops at the Digital Model Factory - Workshop Start 19.07.2022

While theoretical training can be erased from the memory in a very short time, it has been scientifically proven that experiential...

Detaylı İncele
19-07-22
09:30
Eğitimciler

Lean Approach and Industry 4.0

The first definition of the concept of lean is seen in the book The Machine That Changed the World, published in...

Detaylı İncele
19-07-22
13:30
Eğitimciler

Standardization

Standardization is the generation of procedures that all employees must follow while performing a job. The most basic method is SOP...

Detaylı İncele
20-07-22
09:30
Eğitimciler

Value Stream Mapping (VSM- Analysis, and Design)

Value stream mapping (VSM) is a high-level tool that enables lean managers to take a systems approach to implementing operational excellence...

Detaylı İncele
21-07-22
13:30
Eğitimciler

Value Stream Mapping 4.0 (VSM 4.0 - Analysis and Design)

Value stream mapping (VSM) is a high-level tool that enables lean managers to take a systems approach to implementing operational excellence...

Detaylı İncele
26-07-22
09:30
Eğitimciler

Total Productive Maintenance (TPM) – OEE

TPM (Total Efficient Maintenance) is one of the most important steps of the Lean Transformation journey. TPM creates a production environment...

Detaylı İncele
26-07-22
13:30
Eğitimciler

SMED (Single Minute Exchange Of Dies)

SMED is a technique that can be applied to shorten any periodic change process that causes the machine to stop. It...

Detaylı İncele
27-07-22
09:30
Eğitimciler

Gemba, Kaizen, Jidoka, Poka Yoke

Kaizen means "Continuous Improvement". It is a continuous improvement tool that includes everyone from managers to workers. Its aim is to...

Detaylı İncele
28-07-22
09:30
Eğitimciler

FMEA (Failure Modes and Effects Analysis)

The FMEA (Failure Modes Effect Analysis) discipline was developed in the US Army in the manufacture of aircraft in the 1960s....

Detaylı İncele
 

UnoPro Üretim ve Danışmanlık Sa. Ve Tic. Ltd. Şti. olarak web sitemizi geliştirmek, kullanışlı, etkili ve güvenli hale getirmek amacıyla çerezler (cookie) kullanmaktayız. Kullanmaya devam ettiğinizde çerezler ile toplanan kişisel verileriniz ( Gizlilik ve Çerez Politikamız ) belirtilen amaçlar ve yöntemlerle mevzuatına uygun olarak kullanılacaktır.